DA-750 MP Tester                                                           DA-1500 MP Tester

           
              B-100 AC Yoke          DA-200 AC/DC Yoke        DA-400 Lightweight     B-300UF Contour Yoke with GFCI
                                                                                       AC/DC Contour Yoke     Plug & 25' long Neoprene Cord for                                                                                                                                     Extreme Moisture Conditions

Magnetic Particle Equipment and Accessories.
Click for specific .pdf product information
DA-1500 1500Amp Bench Mag Unit
DA-750 750 Amp Bench Mag Unit
DA200 AC/DC Contour Leg Yoke
B300 AC Contour Leg Yoke
DA-400 AC/DC Contour Leg Yoke
B-100 AC Yoke
B-310 Mini AC Yoke
BAC-310 Portable Yoke
PM-50 Permanent Magnet Kit
PL-8 and PL-10 Magnetizing Coils
UW-12 and UW-115 Underwater Yokes
EA-140 Hand Held UV Lamp
SB-100P  High Intensity 100 watt UV Lamp
BIB-150 150 Watt UV Lamp

Click for general .pdf
Call for more equipment information.

Magnetic Particle Testing Accessories

                           
       Transport Cart                            Individual Prod Set,                            Dual Horizontal           Braided Contact Clamp    
          P/N TR-700                                  P/N MA-7000                        Prod Asmbly, P/N MA-7001       P/N MA-7003

                             
                    Either End Connector                           Either End/Lug Adapter               Copper Prod Tip, P/N MA-7STC
                         P/N MA-7EC                                              P/N MA-7EL                      Aluminum Prod Tip, P/N MA-7STA

                        
       20 ' Remote Control Cable                Magnetizing Coils                Ketos Ring (AS5282)       Permanent Magnetic
                 P/N MA-7RC                    8" P/N PL-8, 10" P/N PL-10                P/N KS-100C                   Set, P/N PM-50

                
       UW-12 Underwater Yoke, 12VDC       EA-140 Handheld        SB-100P 100W UV Lamp    BIB-150P 150W UV Lamp
            UW-115 UW Yoke, 115VAC               4 W UV Light                 SB-100PF 230VAC              BIB-150P/F 230 VAC

                                    
         PB-5 Powder Blower            Dry Magnetic Powder-Red, Gray, Yellow           Wet Fluorescent Particles
  PB-5S Powder Blower, 230VAC                5 lb, 10 lb, 50 lb cans.                       Oil or Water base & Concentrates

                      
                              DC-300 DC Power Supply                        Gauss Meter          UV Meter        Radiometer/Photometer
                 Convert 115VAC Yoke  into Pulsed DC                    P/N 5170           DSE-2000A              P/N XRP-3000



     Magnetic Field Indicator (Pie Gauge), used to determine adequacy of field, Part No. MG-50.
     Meets requirements of MIL-STD-271, MIL-STD-1949A and ASTM E709



                          Calibrated Magnetis Field Indicator, Part No. MG25, with certifications
                                   • 10 gauss or 20 gauss calibrated
                                   • Offers highly accurate measurement of residual leakage fields
                                   • Accurate to .5 gauss, with scale range of 20-0-20
                                   • Accurate to .3 gauss, with scale range of 10-0-10



     Weight Lift Test Bars used for calibration and certification of MP inspection
     yokes.  Single 10 lbs. bars are stamped with weight and traceable to NIST.
     Part No. TB-10


Part No. TB10-SP is a 10 lb. Weight Lift Bar with a 1/2" diameter press fit pin and a 0.016" x 0.032" transvers slot articial defects that are epoxy filles and machined flush.


   Part No. NA-16 Notch Defect Test Bar with certification.  For compliance
   with MIL-STD-271 and NAVSEA-TB-T9074-AS-GIB-010/271





                                                   Field Flux Strips (Burma Castrol):  MG-01 Type I (G)eneral
                                                                                           MG-02 Type II (A)ircraft




     Part No. Y300 and Y400 Yoke Lights




                                                                                             Magnetic Powder Blower, Part No. PB-1.
                                                    Adjust powder dispensing from Light to Heavy for controlled application.




             Rubber Powder Blower, Part No. RB-4


                                                                                         Rubber Powder Removal Bulb, Part No. RB-1

  Mag Powder Pick-Up Stick, simply wave the end of the stick over the area to be cleaned and the
  particles will attache themselves to the end of the stick.  When loaded with used material, position
  the stick over a collection container, pull out the slide and the particle fall of. 
  Part No. PS10 (12" long) or PS10-1 (38" long)


                     SPECIAL - Braided Copper Contact Pads, 5"W x 7"L, 3" Wide Hole Centers,
                                        1 Set in stock @ special reduced price of only $50

Back to the Top